25mm Ducting Spacers

About 25mm Ducting Spacers

Duct Spacers shall be made from ABS Acrylonitrile Butadiene Styrene (ABS). (1.04 specific gravity

has been chosen by TECAFINE for the manufacture of all interlocking module spacers

because of its flexibility, strength, and resiliency.

(A) Under compressive stress

(B) The spacer modules can be freely handled on the job site without breakage.

Since many utilities install underground systems year-round, and most large projects carry through more than one year, it is important to use a formulaon of ABS for spacers that will not be adversely by the extremes of summer or winter temperares. Finally, Rib wall construction makes it possible to design a spacer which will hold safely the vertical

loads normally encountered when men work atop large duct banks.

Spacers shall consist of interlocking modules. The interlocking modules shall include an

internal vertical channel on both side edges of the spacers. When the duct bank is

assembled.